|
Type
of Unit |
Fee
(Plus
Tax) |
Description
(Includes
Inspection, Research and Report Writing) |
Inspect
Time |
Condominium
Unit |
$400.00 |
Single unit
with limited inspection of common areas of building |
1-2
hrs |
Zero Lot Unit &
House <1300sf |
$450.00 |
Single unit
with limited inspection of common areas of building |
1-2
hrs |
House >1301sf
& < 2500sf |
$500.00 |
House (with
one kitchen) and attached
garage/carport with
limited small outbuildings |
2-3
hrs |
|
House >2501sf |
$550.00 |
House (with
one kitchen) and attached
garage/carport with
limited small outbuildings |
2-4
hrs |
|
Duplex |
$600.00 |
House (with
two kitchens) and attached
garage/carport with
limited small outbuildings |
3-4
hrs |
|
Triplex |
$700.00 |
House (with
three kitchens) and attached
garage/carport with
limited small outbuildings |
3-4 hrs |
Apartment
>/= 4 units |
$100.00/Hour
Min. $700.00 |
Buildings and
apartment units with limited small outbuildings |
4+
hrs |
Commercial
Building |
$100.00/Hour
Min. $600.00 |
Commercial
buildings with limited small outbuildings |
Varies |
Partial
Inspection |
$100.00/Hour
Min. $100.00 |
Specific building
systems or portions of buildings |
Varies |
|
Outbuildings |
$100.00 |
Large sheds,
detached garages, carports |
<
1hr |
| Reinspections |
$100.00/Hour
Min. $100.00 |
Reinspections
to verify that repairs are complete. Generally
these take less than one hour. |
<1-2 hrs |
Warranty
Inspections |
$100.00/Hour
Min. $100.00 |
Inspections
at the end of a new home warranty period, typically
one year from posession to inform builder of deficiencies |
1-3 hrs |
Thermal
Imaging |
$150.00/Hour
Min. $200.00 |
Not part of a home
inspection |
<1-2 hrs |
$50.00/Hour
Min. $50.00 |
Part of a complete
home inspection |
<1-2 hrs |
Mold
Inspection* |
Varies with
# Samples
Min. $200 |
Recommended for
asthmatic and allergic individuals or those
wanting to know more about the amount and type of mold in
their buildings. May be done with or without a home inspection. |
<
1hr |
Radon
Inspection |
$100.00
per Sample |
Radon inspections
involve placement of testing apparatus,
retrieval of apparatus after 48 hours and laboratory analysis. |
1-2 weeks |
Borescope
Inspection |
$100.00/Hour
Min. $100.00 |
Not part of a home
inspection |
<1-2 hrs |
$50.00/Hour
Min. $50.00 |
Part of a complete
home inspection |
<
1hr |
Travel to other
communities |
Actual
travel expenses are charged, usually by scheduled general aviation,
as well as Juneau airport parking, lodging and meal costs, all without
markup. These can be split if more than one inspection is scheduled
per trip. |
|
Sales Taxes |
Sales taxes are charged at the local rate for the portion of the
fee generated in the local community plus Juneau sales tax for research and report writing. |
* Mold
Inspections are specific to the type and extent of the contamination
and may involve:
Air Sampling (Min. 2 needed), Carpet/Air Sampling, Bio Tape Samples, Swab Samples,
$100 each Identifies types of particles and quantity
Culturing of Samples - add
$100 each Identifies species of mold and quantity
Results are generally available in 72 hours except culturing which
requires about two weeks |
| Note:
Above fees are subject to modification in cases where the building(s)
to be inspected or scope are, in the inspector's judgment, unusual. |
